Published original-file pages
Index of original ECU dump pages currently live.
45 live URLs.
Browse the ECU workshop notes or search original ECU files by SW and HW.
Published ECU workshop guides
- What bricks a EDC15 ECU and how to recover it
- Alientech KESS3: what it is, what launched, and which ECUs it actually reads
- Euro 5 vs Euro 6 diesel ECUs: DPF, EGR and what the flash actually contains
- ECU checksum correction: why the tool must tick it before Write
- Bosch EDC15: how to read it on OBD, bench and boot
- What bricks a EDC15P ECU and how to recover it
- Reading EDC15 ECUs with Alientech KESS3
- Euro 6d and RDE: why a ‘Stage 1 only’ file still has to respect the aftertreatment
- Clone vs virgin ECU file: immo, ISN and EEPROM
- EDC15 bench pinout, boot wiring and power setup
- What bricks a EDC15C ECU and how to recover it
- Reading EDC16 ECUs with Alientech KESS3
- Euro 7 delay: what actually changes for chiptuning workshops
- Bench PSU voltage for Tricore and MDG1 ECUs
- Bosch EDC15P: how to read it on OBD, bench and boot
- Reading EDC17 ECUs with Alientech KESS3
- OPF / GPF on petrol ECUs: MED17, MG1 and SIMOS
- TPROT, passwords and OTP on modern Bosch ECUs
- EDC15P bench pinout, boot wiring and power setup
- What bricks a EDC16 ECU and how to recover it
- Reading MED17 ECUs with Alientech KESS3
- AdBlue / SCR in the diesel ECU: dosing, quality sensor and limp-home
- GPT vs boot vs BDM: three opened-ECU languages
- Bosch EDC15C: how to read it on OBD, bench and boot
- What bricks a EDC16C34 ECU and how to recover it
- Reading MD1 ECUs with Alientech KESS3
- DPF pressure sensors and regen maps: what a stock EDC17 actually does
- Log SW and HW before any flash — the 30-second habit that saves bricks
- EDC15C bench pinout, boot wiring and power setup
- What bricks a EDC16C39 ECU and how to recover it
- Interrupted OBD write: the next ten minutes
- Bosch EDC16: how to read it on OBD, bench and boot
- What bricks a EDC16U1 ECU and how to recover it
- Reading MG1 ECUs with Alientech KESS3
- MOT, ITV and original ECU files after a failed remap
- Why two ECU reads must match before you archive an original
- EDC16 bench pinout, boot wiring and power setup
- What bricks a EDC16U31 ECU and how to recover it
- Reading SIMOS ECUs with Alientech KESS3
- China 6 and EPA calibrations are not Euro SW numbers
- K-line versus CAN on the bench
- Bosch EDC16C34: how to read it on OBD, bench and boot
- What bricks a EDC16U34 ECU and how to recover it
- Reading PCR ECUs with Alientech KESS3
- EGR coolers and the EDC17 map pack: stock vs ‘off’