Mitsubishi Outlander Stage 1 ECU file 60A906 186

Software number different? Send the original file read with your own KESS, Autotuner or Flex. We transfer this Stage 1 onto your dump. Digital product — no refund after payment.

This page is a modified Stage 1 ECU file for the Mitsubishi Outlander 2.0 DiD running Bosch EDC16U31. It is a professional remap — not a stock original flash and not a full ECU backup.

Match hardware 60A906 and software 60A906 186 before you write. If your sticker shows a different software number, do not force this file: send us your original read and we will transfer the Stage 1 changes onto it.

We can transfer this Stage 1 onto your original file

If your ECU is not on this exact software number, send us the original file read with your own tool (KESS, KTAG, Autotuner, Flex, PCMFlash, and similar). We will transfer the Stage 1 modifications onto that dump and return the modified file. Do not send a file that is already tuned unless you say so.

What this Mitsubishi Outlander Stage 1 file is

It is a daily-driver calibration for professional tuners and ECU workshops. Keep a known original on the bench before writing. A complete ECU image for cloning or brick recovery is a full backup — sold separately on request for €20. ECU flash repair after a failed write is €50.

Full backups and ECU flash repairs

• Full ECU backup (complete image for clone or recovery): €20 on request — this modified listing is a Stage 1 calibration — it is not a full ECU backup.
• ECU flash repair after a failed write or brick: €50 — contact support with HW/SW and the tool you use.

Professional use only

These files are intended for professional tuners, ECU specialists and workshops. You must understand flashing, checksums, boot/bench recovery and the risk of a no-start. We do not sell this as a DIY kit for untrained use.

Digital product — no refund after payment

This is a digital file delivered after payment. Once it is paid we cannot refund, reverse or take back the download. Check hardware and software numbers on the ECU sticker before you buy.

FAQ — Mitsubishi Outlander Stage 1

My software number is different. Can you still help?

Yes. Send the original file read with your own tool. We transfer this Stage 1 onto your dump and send the modified file back. Say which tool you used (KESS, Autotuner, Flex, and similar).

Is this a full ECU backup?

No. This Mitsubishi Outlander page is a Stage 1 calibration only. A full backup is €20 on request.

Who can use this file?

Professional tuners, ECU specialists and workshops. Check HW/SW on the ECU before payment. This is a digital product and cannot be refunded once paid.

What if the write fails?

ECU flash repair / recovery is €50. Contact support with hardware 60A906, software 60A906 186, and the tool you use.