Nissan NT400 original ECU flash file (not a backup) 0150 23710LE13B
€ 11
Information
- Maker
- Model
- Engine
- HW
- SW
- : Nissan
- : NT400
- : 3.0 CDI
- : 23710LE13B
- : 0150
- Power
- ECU
- Year
- Flasher
- : 3.0 CDI
- : Bosch EDC17_C45
- : 2016
Description


Download the original ECU flash file for the Nissan NT400 3.0 CDI running Bosch EDC17_C45. This listing is stock flash / calibration data only — not a full ECU backup, not a processor clone, and not an immobilizer EEPROM.
Match hardware 23710LE13B and software 0150 before you write. A neighbouring software version on the same NT400 can still fail the checksum or leave a no-start.
Use this OEM flash to restore factory calibration after a bad remap, to compare a modified dump, or to prepare a professional write. Hardware 23710LE13B with software 0150 is a different package from other Nissan original files on this site.
What this Nissan NT400 original file is
It is the stock map for professional tuners and ECU repair shops. If you need a complete ECU image for cloning or brick recovery, that is a full backup — sold separately on request for €20. ECU flash repair after a failed write is €50.
Full backups and ECU flash repairs
- Full ECU backup (complete image for clone or recovery): €20 on request — this original listing is a flash / calibration file only — it is not a full backup.
- ECU flash repair after a failed write or brick: €50 — contact support with HW/SW and the tool you use.
Professional use only
These files are intended for professional tuners, ECU specialists and workshops. You must understand flashing, checksums, boot/bench recovery and the risk of a no-start. We do not sell this as a DIY kit for untrained use.
Digital product — no refund after payment
This is a digital file delivered after payment. Once it is paid we cannot refund, reverse or take back the download. Check hardware and software numbers on the ECU sticker before you buy.
FAQ — Nissan NT400 original flash
Is this a full ECU backup?
No. This Nissan NT400 page is an original flash / calibration file only. A full backup is €20 on request.
Who can use this file?
Professional tuners, ECU specialists and workshops. Check HW/SW on the ECU before payment. This is a digital product and cannot be refunded once paid.
What if the write fails?
ECU flash repair / recovery is €50. Contact support with hardware 23710LE13B, software 0150, and the tool you use.
