Hyundai i30 Siemens/Continental SIM2K-250 Original ECU File PDEJE7PESE4A ICHOE5R14QE1_TSW-ECU83860220-HMCA2C18334800-
€ 11
Information
- Maker
- Model
- Engine
- HW
- SW
- : Hyundai
- : i30
- : 2.0 T-GDi N Performance 275hp
- : ICHOE5R14QE1_TSW-ECU83860220-HMCA2C18334800-
- : PDEJE7PESE4A
- Power
- ECU
- Year
- Flasher
- : 2.0 T-GDi N Performance 275hp
- : Siemens/Continental SIM2K-250
- : 2018
Description
Hyundai i30 running Siemens/Continental SIM2K-250
| Vehicle | Hyundai i30 |
|---|---|
| Engine | 2.0 T-GDi N Performance 275hp |
| Fuel | petrol |
| Controller | Controller identification requires confirmation. |
| Manufacturer / family | Siemens/Continental SIM2K-250 |
| Hardware (HW) | ICHOE5R14QE1_TSW-ECU83860220-HMCA2C18334800- |
| Software (SW) | PDEJE7PESE4A |
| File type | Original flash/calibration file |
| Price | €11 |
| Verification | Identified |
This listing is an original flash/calibration file for Hyundai i30. It is not a full backup, not a processor clone, and not an immobilizer EEPROM.
Match hardware ICHOE5R14QE1_TSW-ECU83860220-HMCA2C18334800- and software PDEJE7PESE4A before you write. Verify exact HW/SW before programming.
Vehicle engine on this listing: 2.0 T-GDi N Performance 275hp. Do not assume a neighbouring engine uses the same calibration.
What this file is
It is a stock calibration for professional workshops. A neighbouring software version can still fail a checksum or leave a no-start.
Related services
- Full backup (complete image for clone or recovery) is a separate product at €20 when that file exists — this listing is an original flash/calibration file — it is not a full backup. If it is not listed, use Request Full Backup.
- Corrupted ECU File Repair (digital file after a failed write, not physical ECU electronics): €50 — contact support with HW/SW and the tool you use.
Professional use only
These files are intended for professional tuners, ECU specialists and workshops. You must understand flashing, checksums, boot/bench recovery and the risk of a no-start. We do not sell this as a DIY kit for untrained use.
Digital product — no refund after payment
This is a digital file delivered after payment. Once it is paid we cannot refund, reverse or take back the download. Check hardware and software numbers on the controller sticker before you buy.
FAQ
Is this a full backup?
No. This is an original flash/calibration file only — not a full backup. A full backup is a separate product when that file exists (€20).
Who can use this file?
Professional tuners, controller specialists and workshops. Confirm HW/SW before payment. This is a digital product and cannot be refunded once paid.
What if the write fails?
Corrupted ECU File Repair (digital recovery, not physical electronics) is €50. Contact support with the identifiers on this page and the tool you use.