Audi Q7 Bosch MED9.1 Original ECU File 4L0910560B 0261S02202
€ 11
Information
- Maker
- Model
- Engine
- HW
- SW
- : Audi
- : Q7
- : 4.2 FSI 350hp
- : 0261S02202
- : 4L0910560B
- Power
- ECU
- Year
- Flasher
- : 4.2 FSI 350hp
- : Bosch MED9.1
- : 2006
Description
Audi Q7 running Bosch MED9.1
| Vehicle | Audi Q7 |
|---|---|
| Engine | 4.2 FSI 350hp |
| Fuel | petrol |
| Controller | Engine ECU |
| Manufacturer / family | Bosch MED9.1 |
| Hardware (HW) | 0261S02202 |
| Software (SW) | 4L0910560B |
| File type | Original flash/calibration file |
| Price | €11 |
| Verification | Identified |
This listing is an original flash/calibration file for Audi Q7. It is not a full backup, not a processor clone, and not an immobilizer EEPROM.
Match hardware 0261S02202 and software 4L0910560B before you write. Verify exact HW/SW before programming.
Vehicle engine on this listing: 4.2 FSI 350hp. Do not assume a neighbouring engine uses the same calibration.
What this file is
It is a stock calibration for professional workshops. A neighbouring software version can still fail a checksum or leave a no-start.
Related services
- Full backup (complete image for clone or recovery) is a separate product at €20 when that file exists — this listing is an original flash/calibration file — it is not a full backup. If it is not listed, use Request Full Backup.
- Corrupted ECU File Repair (digital file after a failed write, not physical ECU electronics): €50 — contact support with HW/SW and the tool you use.
Professional use only
These files are intended for professional tuners, ECU specialists and workshops. You must understand flashing, checksums, boot/bench recovery and the risk of a no-start. We do not sell this as a DIY kit for untrained use.
Digital product — no refund after payment
This is a digital file delivered after payment. Once it is paid we cannot refund, reverse or take back the download. Check hardware and software numbers on the controller sticker before you buy.
FAQ
Is this a full backup?
No. This is an original flash/calibration file only — not a full backup. A full backup is a separate product when that file exists (€20).
Who can use this file?
Professional tuners, ECU specialists and workshops. Confirm HW/SW before payment. This is a digital product and cannot be refunded once paid.
What if the write fails?
Corrupted ECU File Repair (digital recovery, not physical electronics) is €50. Contact support with the identifiers on this page and the tool you use.